Technical Requirements For The Operation Of The Road Paver Machine

Before the Road Paver Machine job, you should do a series of checks to make sure there is no problem to work, then what kind of technical requirements do you need for the Road Paver Machine to run? Let's take a look:

(1) According to the construction requirements, determine the working speed, paving width, paving thickness, scraper conveyor and screw feeder speed, bucket opening and other parameters of Road Paver Machine.

(2) Mechanically driven asphalt mixture Road Paver Machine, shifting must be carried out when the Road Paver Machine is completely stopped, and strong gearing is strictly prohibited.

(3) When accepting the unloading, the Road Paver Machine push-up roller abuts on the rear wheel of the dump truck, and the dump truck hangs in the neutral position, and the two are synchronized under the top push of the Road Paver Machine.

(4) When the Road Paver Machine is in operation, all agencies and systems should coordinate their work and correct them if necessary. The operation speed should be kept stable, and the number of stops and starts should be minimized to keep the equipment continuous and balanced.

(5) It is strictly forbidden for the operator to leave the bridge during the operation of the equipment. Unrelated personnel are not allowed to go up and down during the operation or stay on the bridge.

(6) During the transition of Road Paver Machine, it is forbidden to shift gears on the ramp or slide downhill in neutral. 20-40min before the paving operation, the screed is preheated to be close to the paving temperature of the asphalt mixture; therefore, when the operation is suspended, the preheating system is used for heat preservation to prevent the screed from cooling; when preheating with electricity, Start the engine first.