Home>information
Rubber Paving Machine is used to operate rubber materials. Before the Rubber Paving Machine, you should do a series of checks to make sure that there are no problems before you can work. Checking in advance can ensure its efficiency. What kind of technical requirements do you need for Paving Machine to operate?
(1) According to the construction requirements, the parameters such as the working speed, paving width, paving thickness, scraper conveyor and screw feeder speed, and bucket opening degree of the Rubber Paving Machine are reasonably determined.
(2) Mechanically driven asphalt mixture Rubber Paving Machine, shifting must be carried out when the Rubber Paving Machine is completely stopped, and strong gearing is strictly prohibited.
(3) When receiving the unloading, the Rubber Paving Machine push-up roller abuts the rear wheel of the dump truck, and the dump truck hangs in the neutral position, and the two push simultaneously under the push of the Rubber Paving Machine.
(4) During the operation of Rubber Paving Machine, all agencies and systems should coordinate their work and correct them if necessary. The operation speed should be kept stable, and the number of stops and starts should be minimized to keep the equipment continuous and balanced.
(5) It is strictly forbidden for the operator to leave the bridge during the operation of the equipment. Unrelated personnel are not allowed to go up and down during the operation or stay on the bridge.
(6) During the transition of Rubber Paving Machine, it is forbidden to shift gears on the ramp or slide downhill in neutral. 20-40min before the paving operation, preheat the screed to make it close to the paving temperature of the asphalt mixture; therefore, when the work is suspended, the preheating system is used for heat preservation to prevent the screed from cooling; when preheating with electricity, Start the engine first.
