Home>information
The use of the Rubber Paving Machine has accelerated the construction progress of the project to a certain extent. Because the Rubber Paving Machine is a construction equipment mainly used for paving various materials on the base and surface layers of expressways. Various systems cooperate with each other to complete the paving work, mainly including the walking system, hydraulic system, conveying and distribution system, etc. Under normal circumstances, after the paving operation is completed, the Rubber Paving Machine should be routinely maintained (daily maintenance) ) Content of the procedures for routine maintenance operations.
1. Each working device and movement mechanism of the Rubber Paving Machine in direct contact with the asphalt mixture during operation. After operation, it is sprayed with diesel oil and then operated for a period of time to remove residual asphalt on it to make it operate freely and rotate flexibly. It is forbidden to spray diesel to electronic control systems and spirals to prevent fire and combustion when power is on.
2. After paving the second lime soil, flush the water with water to flush out the white material. After washing, lubricate the moving parts of the scraper conveyor chain with waste hydraulic oil, and apply anti-rust oil to the piston rod. Be careful not to flush the water to the appliance. And bearing parts to prevent short circuits and foreign objects from entering the bearing.
3. Wipe the surface of the hydraulic telescopic screed guide sleeve and the surface of the telescopic sleeve. When it is not used for a period of time, it should be coated with rust-proof oil and retracted into the cylinder; Bundled.
4.Clean and check the elevation adjustment device of the level meter, apply grease to the lead screw. Apply grease to the floating boom slide. Apply grease to each oiling point until the joints overflow. The Rubber Paving Machine of the cup, to observe the consumption situation, fill it at any time.
5Rubber Paving Machine cleaning work should be performed outside the work site. When cleaning work is required in the work site, a layer of plastic cloth must be laid on the asphalt pavement to keep the residual asphalt and waste flowing during the cleaning process. Diesel and other materials should be cleaned up after flowing onto the plastic cloth. Do not allow diesel and other residues to flow onto the paved asphalt pavement to prevent corrosion of the asphalt pavement.
6. Before the driver leaves the bridge, stop the Rubber Paving Machine, the brakes must be reliable, the hoppers on both sides should be lowered, the screeds should be placed on the ground or hooked up. Pull out the start key and cover Protective cover, lock the central control box, and turn off the main power switch.
