Manufacturers Talk About Construction Notes Of Rubber Paving Machine

In recent years, with the rapid development of China's high-level stadiums and municipal runways, the quality of rubber clay pavements is becoming higher and higher. How to introduce and use existing and suitable advanced construction machinery has become our company to seize the market and expand the construction field. One of the important tasks of the Rubber Paving Machine manufacturers to share with you, the matters that the Rubber Paving Machine should pay attention to during construction.

1. The working condition of vibrating rods should be frequently checked during paving. When pitting or cracking occurs on the pavement somewhere on the cross section, it means that there is something wrong with the vibrating rods at that place, and the machine must be stopped for inspection or replacement. Vibrating rod at the place, after paving, it is found that there is a mortar strip pulled by the shiny vibrating rod on the road surface, it indicates that the vibrating rod is too deep, and the correct position must be adjusted until the bottom edge of the vibrating rod is pressed on the bottom plate. Above the trailing edge.

2. When paving a two-runway surface with a width of 2m or more, if the two vehicles with the same consistency of rubber material are unloaded left and right, the paving speed should be set on the dry side, and the vibrator on the lean side should be set. The frequency is quickly reduced.

3. When the rubber material is not available, or there is a mechanical failure in the mixing building, the downtime must not exceed 2/3 of the initial setting time of the rubber material under the prevailing temperature. When the Rubber Paving Machine has a mechanical fault, the building should be stirred before the production can be stopped. During the downtime, the rubber material in the Rubber Paving Machine has not yet set, which can eliminate the fault and allow paving to continue Otherwise, the Rubber Paving Machine should be pulled out of the paving surface as soon as possible. After troubleshooting, restart the paving.