Home>information
As the saying goes, if you want to get rich, you need to build roads first. As the country’s economy grows gradually, building roads is no longer limited to building muddy roads into flat roads. The quality of the traditional manual smoothing is no longer suitable for the implementation of road construction, and most road builders turn to the application of mechanical equipment. Rubber Paving Machine on the ground is the tool of choice in rubber construction. But we all have a lot of concerns in the process of use, do not know how to use it? Don't know what to pay attention to? Next, let's talk about some rules for using Rubber Paving Machine, so that everyone can use concrete Rubber Paving Machine safely in the future.
Before use, check whether the motor, electrical switch, cable and wiring are normal and in compliance with the regulations, and install a leakage protector. Check and clean the sundries on the wiper before use to avoid the whole machine from jumping. After the power is turned on, the trial operation is carried out. The blades rotate clockwise and must not be reversed. The operator should wear insulated shoes and gloves, and the cables should be carried by auxiliary personnel. The auxiliary personnel should also wear insulated shoes and gloves. Pay attention to prevent the cable insulation layer from being broken and causing electric shock. Rubber Paving Machine malfunctions, it must be shut down to cut off the power before overhauling. The Rubber Paving Machine should be stored in a dry, clean and free of corrosive gas. The handle should be placed in the specified position, and it must not be loaded or unloaded during transfer.
Only by doing these things well, can the security risk be reduced to a greater extent. While ensuring the safety of the builder, it can also increase the service life of the concrete Rubber Paving Machine.
