How To Clean The Plastic Track

Due to the particularity of the material, the plastic track should be maintained after use to extend its service life. Next, let's take a look at how to clean the runway.

1. Rinse the entire site with a water pipe or a mop with a high-pressure device, and manually clean it with a brush. If there is a small amount of residual water on the glue surface after washing, wipe it off with a dry cloth;

2. Use a mounted sweeper for mechanical cleaning (select the size according to your needs);

3. Use a rake or approved chemical agent to remove weeds, algae, and moss;

4. If the plastic runway is stained with oil, it can be cleaned with 10% ammonia or detergent, washing powder, etc., and the place with black marks can be cleaned with a neutral detergent;

5. Freeze the chewing gum with ice spray;

6. Check whether the top layer on the site is firmly bonded to the bottom layer, and the shell should be fixed immediately;

7. Implement special protection in places where spikes often run;

8. Check all lines and signs, and update them if necessary.

The above is the main content of how to clean the plastic track regularly, I hope it will be helpful to your use.