Home>information
Everyone should pay attention to the safety problem, which is also outside the project. We have summarized some safety measures to stop the operation of paver in the project, and hope you can do well in the project. The bridge of the paver and the operation site shall have a wide field of vision, and all obstacles hindering the work shall be removed.
When the paving operation is stopped, irrelevant personnel shall not stay on the bridge. The driver shall not leave the post without permission; When unloading materials from the truck to the paver, it shall act in harmony and travel synchronously to avoid collision; The gear shift must be stopped when the paver is completely stopped. It is strictly prohibited to forcibly shift or slide in neutral on the ramp.
When the Paver Screed is preheated, the heat shall be controlled to avoid deformation due to partial overheating. The heating process must be guarded by a specially assigned person; The paver shall be driven smoothly without sharp steering. When stopping curve operation, the distance between the end of ironing installation and curb shall not be less than 10cm to avoid collision.
When cleaning the paver with diesel, do not approach the open fire. There is nothing wrong with being careful. When there is no accident, I feel it doesn't matter, but I'm not afraid of ten thousand and just in case. I hope you can keep these safety measures in mind.
