Home>information
1. The road paver machine operator must undergo professional training, understand the mechanical performance, structure, master the maintenance knowledge, master the performance of the machine, the essentials of operation and safety matters, and can operate alone after being confirmed by the relevant departments.
2. Before starting the engine, you must check whether the amount of oil (oil, fuel, working oil, lubricating oil) is sufficient, the tightness of the belt on the fan, and whether there is oil leakage and loose parts. Check whether all kinds of accessories, accessories, tools, etc. required for the work of the day are available.
3. After starting the rubber paving machine engine, check whether the indication of each monitoring system is normal after running at idle speed for at least two minutes.
4. The material transport vehicle must be commanded by someone to unload the material into the machine hopper accurately.
5. Before the running track paver machine works, it is necessary to get in touch with the left and right leveling personnel to ensure that other personnel are not in the operation before operation.
6. When switching from the working gear to the driving gear, it must be carried out with the small accelerator, after the machine is completely stopped, and all working parts stop working.
7. Operators are strictly prohibited from drinking and operating the running track paver machine. When operating the equipment, they must be neatly dressed, no slippers, and no smoking, eating or other behaviors that hinder safe operation.
8. After the rubber paving machine is working, all protective devices must be installed in the designated position.
9. The operating room (table) must be kept clean, oil and other dirt should be cleaned up in time, and tools and other items should not be placed indiscriminately.
10. Before the driver leaves the operating platform, all operating mechanisms must be placed in the \"0\" position.
11. When widening the hydraulic automatic widening road paver machine, you must pay attention to and observe the surrounding conditions to avoid injury and damage to the equipment.
12. When the paving is heated by a liquefied gas tank, the tank valve must be closed in the event of flameout or fire. When the ambient temperature is higher than 200C or the air tank is directly exposed to the sun, the gas tank is used for heating, and the gas tank must be covered.
13. After the paving is completed, the screed must be placed on the dunnage when cleaning the material conveying, tamping device, and shutdown. The machine should not obstruct traffic when the machine is parked, and a warning sign should be placed. Run the engine idle for 5 minutes, then turn off the engine, then cut off the power and lock the instrument panel.
14. Road paver machine maintenance must be carried out in accordance with the requirements in the manual.