Home>information
The industrial steps and preparation process of rubber baffle of rubber paver are as follows:
1: Road paver machine add rubber, reinforcing agent, antioxidant, nylon thread and diluent into the mixer in turn. The rotor speed of the mixer is 45-55 rpm, the upper top bolt pressure is 0.3-0.5mpa, the mixing time is 50-140 seconds, and the paver machine discharge temperature is 150-165 ℃, so as to obtain a section of master rubber.
2: add a section of master road paver machine, curing agent, accelerator and anti coking agent obtained in step 1 to the internal mixer. The rotor speed of the internal mixer is 20-40 rpm, the upper top bolt pressure is 0.3-0.5mpa, the mixing time is 50-130s, and the rubber paving machine discharge temperature is 90-110 ℃, so as to obtain the final road paver machine.
3: put the final paver machine obtained in step 2 into a plate vulcanizer and directly press it into a plate.
