Home>information
The Paver Machine can complete the work steadily and smoothly, and it is inseparable from the cooperation between various systems. Of course, there are also correct operating procedures for operators. These are the conditions to ensure the smooth construction of the equipment. The safe operating procedures for the paver mainly include the following: paver operators must undergo professional training.
Understand the mechanical performance and structure, control the knowledge of maintenance, and control the performance and operation essentials and safety matters of the machine proficiently, and can only be operated alone after being confirmed by the relevant department. Before starting the engine, it is necessary to check whether the amount of oil (oil, fuel, working oil, lubricating oil) is sufficient, the belt tightness on the fan, whether there is oil leakage and loose parts. Check whether the various accessories, accessories, tools, etc. required for the work of the day are complete.
After starting the engine, run at least two minutes at an idling speed and check whether the monitoring system indicates whether it is normal. The material handling vehicle must be directed by someone to accurately discharge the material into the machine hopper. Before working, the paver must be contacted with the left and right leveling personnel to ensure that other personnel are not in the operation.
When shifting from the operating gear to the driving gear, the machine must be stopped at low throttle, and the working parts of the machine are completely stopped. The operator is strictly prohibited to operate after drinking. When operating the equipment, they must wear uniform, no slippers, and no Smoking, eating and other behaviors that hinder safe operation, all protective installations must be installed in designated positions after the paver is working.
The operation room (station) must be kept clean, and oil and other dirt must be cleaned up in time, and tools and other items must not be placed randomly. Before the driver separates the operating platform, all operating mechanisms must be placed in the "0" position. When the hydraulic automatic widening paver is widening, it is necessary to pay attention to and observe the nearby conditions to avoid injury and damage to the equipment.
