Home>information
If the oil temperature of the Road Paver Machine hydraulic system is too high, the viscosity of the oil will decrease, the leakage will increase, the oil film of the lubricated part will be damaged, and the wear of the parts will be intensified. At the same time, the high temperature will also make the gasket made of rubber and other materials. Damaged by premature aging. Therefore, it is very important to control the proper oil temperature. When the oil temperature is too high, it is necessary to stop the inspection. Generally, the following aspects can be started:
(1) Check if the level of the Road Paver Machine tank is too low. Experience has shown that high oil temperatures are often caused by lack of oil in the fuel tank, so it should be replenished in time when there is a lack of oil.
(2) Whether the Road Paver Machine hydraulic oil filter and circuit are blocked.
(3) Is the radiator normal? If a large amount of dust adheres to the radiator, the heat dissipation may be poor and the oil temperature may increase. Since the working environment of the Road Paver Machine is dusty, the radiator should be cleaned up in time.
(4) Whether the quality of the Road Paver Machine hydraulic oil is acceptable. If the quality of the added oil is unqualified, the system oil temperature will be too high.
