How Much Is The Common Device Fault Of Running Track Paver Machine?

What are the common technical problems of Running Track Paver Machine? I believe that you don’t know much about it. Let’s take a look at the related content of Running Track Paver Machine.

Hydraulic oil overheating

The high oil temperature in the Running Track Paver Machine hydraulic system reduces the viscosity of the lubricant, increases leakage, damages the oil film of the lubricated parts, and exacerbates part wear. At the same time, high temperatures can cause premature aging of seals made of rubber and other materials. Therefore, it is very important to control the proper oil temperature. When the oil temperature is too high, it must be stopped for inspection.

(1) Check if the running track Paver Machine tank level is too low. Experience has shown that high oil temperatures are often caused by the lack of oil in the fuel tank. Therefore, when oil is scarce, it should be replenished in time.

(2) Check if the Running Track Paver Machine hydraulic filter and ring are blocked.

(3) Check if the Running Track Paver Machine radiator is normal. If the heat sink is attached to a large amount of dust, it will cause poor heat dissipation and increase the oil temperature. With the dust of the Running Track Paver Machine working environment, the radiator should be cleaned in time.

(4) Check if the running track Paver Machine hydraulic oil quality is qualified. If the quality of the oil is unqualified, the system oil temperature is too high.

In addition, the hydraulic system works when the oil is low, which is liable to cause damage to the pump and the motor. Therefore, it is necessary to check the operating state of the pump and the motor and replace the damaged parts of the pump and the motor when the oil shortage is eliminated.