Shandong China Coal Rubber Paver Equipment Co., Ltd.

Home / Industry Info / Installation Of Automatic Leveling Device For Running Track Paver Machine

Installation Of Automatic Leveling Device For Running Track Paver Machine

Date: 2022-05-31     Tag:  Paver Machine Road Paver Machine Rubber Paving Machine Running Track Paver Machine

The running track paver machine is equipped with an advanced contact automatic leveling device. Please read the corresponding "Automatic Leveling Device User Manual" carefully before use road paver machine.

Note: The road paver machine power supply must be turned off before loading and unloading the leveling instrument. Please handle it with care during loading and unloading of the leveling instrument to prevent bumping. The surface of the ultrasonic probe should be kept clean, and do not stick to oil.

Only after the key switch is turned off, the connection plug between the leveler and the rubber paving machine can be removed.

Installation Of Automatic Leveling Device For Running Track Paver Machine

For different paver machine paving widths, the leveling instrument is configured in the following two ways:

1) Use a longitudinal slope sensor and a tilt sensor (cross slope) for paving widths below 6 meters;
      2) Two longitudinal slope sensors (one on the left and one on the right) are used for paving widths over 6 meters. The RP952 type road paver machine is equipped with two vertical and one horizontal automatic levelers, and the longitudinal slope sensor has two installation methods:

(1) Installed in a position that forms a straight line with the center line of the dividing rod;
      (2) When road paver machine paving the road surface and using the mobile automatic leveling reference device, the longitudinal slope sensor is installed on the center line of the left and right automatic leveling cylinders.

skype sail Online Email:sales@chinacoalintl.com
menu
Home Products Top

+

+

Please leave a message