Shandong China Coal Rubber Paver Equipment Co., Ltd.

Home / Industry Info / What Are The Common Faults Of Running Track Paver Machine?

What Are The Common Faults Of Running Track Paver Machine?

Date: 2020-02-25     Tag:  Running Track Paver Machine Paver Machine

1.Running Track Paver Machine auger does not work

Running Track Paver Machine sometimes has left and right distributors that are not working. The reason is generally that the fuel system is faulty. The reasons for the low pressure of the oil filling system are: the oil inlet pump has a poor oil inlet; the pressure of the charge pump relief valve is low; the charge pump itself is faulty; the hydraulic motor is seriously leaking. Generally, the charge pump and its relief valve should be inspected.

2.Running Track Paver Machine does not work on one side of the leveling hydraulic cylinder

Running Track Paver Machine If one side of the leveling hydraulic cylinder does not work, it is generally caused by lack of oil in the side hydraulic cylinder. The cause may be a blockage in the solenoid valve, priority valve or hydraulic cylinder inlet line. In this case, the side solenoid valve and the oil inlet line can be inspected first, and then the priority valve is checked.

3.Running Track Paver Machine runs or does not walk

Running Track Paver Machine has a walking failure, generally running Track Paver Machine or not walking on one side. This failure may be caused by loose (or open or no power) wiring to control the solenoid of the working pump. If the working pump on one side cannot work due to no electricity, the side traveling motor will not work because it has no oil, which may cause the machine to run off or one side cannot walk.

What Are The Common Faults Of Running Track Paver Machine?

skype sail Online Email:sales@chinacoalintl.com
menu
Home Products Top

+

+

Please leave a message