Home>information
When the machine is not used for a long time, the PTJ-120 Sprayer Machine should be parked on a flat surface and the paving roller should be dropped into contact with the ground to prevent the roller from bending. Also, ensure that the floor on which the PTJ-120 Sprayer Machine is placed is kept dry. No debris or flammable or explosive materials should be piled around. When the machine is transferred to the work site, the distance can be close and the space can be moved automatically. Otherwise, Should be moved using other means of transport.
To clean the flattening roller, some workshops may be dusty or the raw materials are not clean. The PTJ-120 Sprayer Machine flattening roller is dirty, and the material is contaminated or scratched when the material is leveled, resulting in product failure. Therefore, it is important to pay attention to cleaning the PTJ-120 Sprayer Machine flattening roller. When cleaning the roller, use long cloth and rust-proof cleaning oil. Spray the rust-proof cleaning oil on the concrete paver roller first, then spray it on the cloth. The rust-proof cleaning oil is stacked with the metal material, and then the PTJ-120 Sprayer Machine is switched to manual and then the concrete paver is switched to automatic. The two sides grasp the inlet and outlet cloths and use the roller to roll and the cloth to rub. Dirty things on the drum to achieve a clean and smoothing effect.
Regularly start the PTJ-120 Sprayer Machine and turn on all hydraulic functions on the machine to allow the hydraulic drive components to work regularly to prevent damage to the associated seals due to prolonged parking and corrosion of metal components such as cylinder rods. Retract all the cylinder rods into the hydraulic cylinder oil chamber as much as possible to better protect the surface of the cylinder rod. Before parking the PTJ-120 Sprayer Machine for a long time, the mechanical hinge points, lubrication and maintenance work of the bearings should be done. Check the integrity of the dustproof sleeves of the mechanical parts of the PTJ-120 Sprayer Machine and replace the damaged seals in time.
