Home>information
A road paver machine is a construction equipment used for paving various materials on the road surface. The TPJ1.5 rubber paving machine produced by China Coal Group is a rubber paving machine, mainly used in plastic runways and playgrounds. Compared with other running track paver machine, the TPJ paver developed based on advanced technology experience at home and abroad has greatly improved automation, excellent performance, energy saving and low consumption, easy to use, and can meet the quality standards of the competition venue.
Check whether the rubber paving machine motor, power cord, and grounding wire are safe and reliable. Check whether the equipped electrical power supply system fits the power supply status of the machine, check the consolidation of all connections, bolts are not allowed to loosen, check whether lubrication points, reducers add oil, and the electric control box switch is flexible and easy to use.
The rubber paving machine is placed on a wooden mold or a steel touch. In the unpaved area, start walking before, after, and stop. Check whether it is normal after turning on the oscillating roller for 20 seconds. The concrete pile should be higher than the template and start walking first. The motor makes the running track paver machine move forward. After the concrete is pressed, the oscillating motor is started to work. While oscillating, the machine moves back and forth 2-3 times. When the concrete surface is raised with slurry, the oscillating motor is turned off, and the walking roller is rolled back and forth 2- Finish the leveling operation of the concrete surface 3 times, paving the curve or the machine deviation, you can move the correction handle to correct it.
At the end of each running track paver machine construction, the mud stuck to the roller should be cleaned with a brush to prevent the concrete from being fixed on the roller after drying, which will affect the next use. When the machine is not in use, find a piece of lay aside Place the machine suspended flat on the concrete floor to avoid deformation of the rollers.