Home>information
Plastic running track paver machine is also called rubber paving machine. The road paver machine produced by China Coal manufacturer uses Siemens edge frequency stepless speed regulation technology and hydraulic transmission device to improve the degree of automation of its paving, and its performance greatly meets the competition venue. The construction requirements of the paver meet the quality of the competition venue, high quality and convenient operation. The advantages of this paver are high efficiency and low consumption, and it can be widely used in the construction of school rubber track. Today we will talk about how to maintain the running track paver machine.
(1) Clean the rubber paving machine: remove the mud, sand and asphalt accumulated on the surface of the paver; remove the dust and grease on the surface of the engine, hydraulic components and other parts. Be careful not to get dirt into the fuel filler openings and air cleaners.
(2) Check and eliminate the leakage of each rubber paving machine part.
(3) Check the connection and fastening of the parts of the rubber paving machine, especially whether the connecting bolts of the left and right track beams and the frame, the screed, the distribution device and the scraper conveyor are loose or broken, and tighten them if necessary Or replace.
(4) Check the nozzles, connecting pipes, gas tanks and switches of the road paver machine heating system.
(5) Check the quantity of engine oil, fuel, coolant and hydraulic oil, and add new oil to the oil level indication scale as required.
(6) Check whether the road paver machine electrical plugs are loose.
(7) Check whether there are cracks in the blades of the spiral feeder, if any, replace it.
(8) Check whether the road paver machine amount of grease in the centralized lubrication device is appropriate.