Home>information
Before the operation of the Rubber Paving Machine, in order to meet the needs of the equipment, a series of checks should be made before the equipment is used. It is necessary to determine that there are no problems before the operation. Therefore, the operation of the Rubber Paving Machine requires us to master some related technologies. Requirements to meet job demands.
(1) According to the construction requirements, the working speed, paving width, paving thickness, scraper conveyor and screw distributor speed, opening of the bucket door and other parameters should be reasonably determined.
(2) Mechanical transmission of asphalt mixture paver machine, gear shifting must be performed when the paver is completely stopped, and strong gear shifting is strictly prohibited.
(3) When accepting the unloading, the pusher roller of the paver is close to the rear wheel of the dump truck, the dump truck is in neutral, and the two move forward simultaneously under the push of the paver.
(4) Various institutions and systems should work in coordination during Rubber Paving Machine operation, and be revised in time if necessary. The operating speed should be stable, and the number of stops and starts should be reduced as much as possible to maintain continuous and balanced operation of the equipment.
(5) It is strictly forbidden for operators to leave the bridge while the equipment is in operation, and unrelated personnel shall not go on or off the equipment during operation, or stay on the bridge.
(6) It is forbidden to shift gears on the ramp or slide downhill in neutral while the paver is driving. Preheat the screed 20-40 minutes before the paving operation, so that it is close to the paving temperature of the asphalt mixture; when the operation is suspended for any reason, use a preheating system for insulation to prevent the screed from cooling; The engine should be started first.
In short, strictly in accordance with the operation requirements of the Rubber Paving Machine before operation, it can effectively improve the efficiency of the equipment while meeting the needs of the equipment, and in order to maintain the efficiency of the equipment, regular maintenance and inspection work is also a bit Indispensable.
