Home>information
1. Frame: TPJ-1.5 Rubber Paver Machine Use the profile steel(channel steel)and the welding structure of steel plate, impact resistance, and doing the test of distortion, it's structure are very stationary.
2. Driving device: TPJ-1.5 Rubber Paver Machine Using the chain wheel caterpillar transmission, controlled with the motor stepless speed regulating with changeable frequency, move steady, free for advancing and regressing, the linearity is easily to master. If needed pave the form as arch, the turning operation is also very convenient, and the size of the arch will not be limited. The difference base on the bottom can walk free.
3. Back screed: Paving the screed is the important component that concern with the quality of paving. The paving screed of this machine has the function of adjust the height, control the angle, heating with galvanothermy and vibratory compaction, convenient use, ensure the formation of the paving ground.
4. Electric cabinet: This machine used the device of centralized electronic control(see the chart of the electric cabinet), once the operator press the buttons or knob which included different functions the machine can in the condition of process.
5. Leveling beam: Main used to control the thickness and width when charging, the screw adjusted the height, the ensure the charging precision.
6. Undercarriage: Adopted the hydraulic transmission, achieved rubber wheel undercarriage's rising and dropping. After the paving, landing the rubber wheel, rising the machine, and it walked or transported convenient when non-working. Non-working's walking is namely manual turning the pull rod, push and pull the machine.
